Image

The surface roughness to be applied should be removed.

The corners of the column should be rounded for a
smooth transition.

Gaps should be repaired with
high-strength
repair mortar.

PRIMER PROCESS

Before proceeding with the priming process, the components should be mixed at the appropriate rate and applied to each cm2 surface of the column, which was previously roughened and repaired.

Image

BONDING PROCESS

Image

After the appropriate component mixture is made by expert teams on the surface of which the primer has dried before, the bonding resin is applied to the column surface and the fabric is adhered

FABRIC WRAPPING PROCESS

After the m2/kg appropriate bonding resin is applied to the column surface, the mortar should be adhered to the column by the expert teams of the fabric according to the appropriate overlap and hugging zones before the mortar hardens.

Image

SANDBLASTING PROCESS

Image

Optionally, sandblasting can be done on the pre-applied
bonding resin.

ATTENTION

Before reinforcing with carbon fiber, it should not be applied to the columns without the decision of an expert construction engineer, and carbon fiber fabric should be applied by expert teams.


Otherwise, you will not be able to strengthen the carrier system
and you will suffer financial loss.